MDD065B-N-060-N2M-095PL0
The MDD065B-N-060-N2M-095PL0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts drive commands into precise rotary motion for indexing tables, pick-and-place heads, and other compact axes. Its 065 frame size and B-length body allow installation in restricted machine layouts while maintaining the thermal capacity needed for continuous industrial duty. This layout makes the motor suitable for compact automation systems that require repeatable positioning and responsive speed control during frequent operating cycles.
The motor reaches a nominal speed of 6000 rpm, allowing rapid cycle rates when paired with high-speed drives. At standstill, it delivers 1.5 Nm of continuous torque, supporting static load holding without overheating. Closed-loop control is aided by digital servo feedback, and position data come from an integrated multi-turn absolute encoder, which allows the drive to retain position information after power loss. All electrical power and signal lines exit on the left side of the stator housing, which can simplify routing when several motors are mounted close together. This arrangement helps keep cable runs organized in compact machine assemblies.
A centering boss of 95 mm locates the flange accurately during mounting. The motor connects through a threaded connector that carries power, encoder, and protective earth conductors. The output shaft uses a keyway, and a layered shaft seal helps keep lubricants and coolants away from the bearing region. Standard balancing helps reduce vibration during operation, and the motor uses a standard single-ended shaft. Because the unit is supplied without a blocking brake, external holding must be provided if zero-power retention is required.
