MDD065B-N-060-N2M-095PL1
The MDD065B-N-060-N2M-095PL1 is a synchronous servo motor in the MDD Synchronous Motors series from Bosch Rexroth Indramat. It is intended for use with digital drive controllers and provides controlled rotary motion for indexing tables, small gantries, and packaging spindles. In automated systems, it supports repeatable starts, stops, and speed changes during coordinated motion. The motor has a standard housing and a keyway shaft end for direct coupling to common machine transmissions. Its mounting arrangement supports accurate placement on the machine frame and stable integration into industrial equipment.
The motor seats against a centering flange with a diameter of 95 mm, which helps align the housing during installation. The power and feedback plugs face left, and the motor uses a detachable connector for electrical connection. This layout can simplify cable routing when the motor is mounted close to machine frames or guarding. At standstill, it delivers 1.5 Nm of continuous torque, and its nominal speed reaches 6000 rpm for fast-cycle operation. Standard dynamic balancing reduces vibration, and the integrated brake provides 3.0 Nm of holding torque when power is removed.
Rotor position is monitored by an integrated multi-turn absolute encoder and transmitted through digital servo feedback, so the controller can recover position data after a power cycle. This feedback arrangement supports closed-loop control during positioning and speed regulation. The motor is supplied with a blocking brake, which helps hold suspended or vertical loads when the axis is stopped. The motor has size code 065, giving it a compact housing, while length code B supports normal heat transfer through the frame. A shaft seal helps keep coolant mist and oil away from the front bearing, and the standard housing is suited for continuous-duty operation.
