MDD065B-N-060-N2M-095PR0
The MDD065B-N-060-N2M-095PR0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts precisely metered current into rapid shaft rotation for positioning tasks in compact industrial axes. A standard housing and standard rotor balancing support direct installation, while the right-side connector layout helps simplify cable routing in tight machine frames.
This model has a centering diameter of 95 mm, so the flange fits accurately into correspondingly machined machine faces and maintains coaxial alignment. Its continuous standstill torque is 1.5 Nm, giving the drive enough holding force for light loads while the shaft remains locked electronically. Under rated excitation, the motor reaches a nominal speed of 6000 rpm, which suits high-speed spindles or pick-and-place modules that require short cycle times. The motor has size code 065, and length code B indicates the second-longest active core in this frame. The right-hand connection direction uses a sealed circular connector, so power and feedback lines can be detached quickly. A standard single-ended shaft is provided on side A only, which avoids extra overhung mass at the rear of the motor.
An integrated multi-turn absolute encoder supplies position data across multiple revolutions, and the drive processes that signal through digital servo feedback (DSF) for precise commutation. The motor is delivered with a shaft seal, which helps limit dust ingress at the shaft opening. It does not include a holding brake, so static holding torque must be supplied by the drive when required. Mechanical coupling is accomplished through a hardened keyway on the shaft end, allowing positive locking to pulleys or couplings without relying on friction alone.
