MDD065C-N-040-N2L-095GR1
The MDD065C-N-040-N2L-095GR1 is a synchronous servomotor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts regulated electrical input into precise mechanical rotation for positioning and speed-controlled axes in automated machinery. The motor supports repeatable motion in equipment such as transfer units, packaging machines, and indexing stations. Rexroth drive modules can read its feedback signals and regulate current for closed-loop operation. This arrangement helps the axis maintain stable speed and accurate positioning when the load changes during normal operation.
The motor uses a centering pilot of 95 mm, allowing precise alignment inside a gearbox or mounting flange. During stall, it can deliver a continuous torque of 2.1 Nm, so the drive can hold modest loads without overheating. The nominal shaft speed reaches 4000 rpm, matching medium-speed packaging, pick-and-place, or indexing tasks when paired with an inverter. Feedback signals are generated through Digital servo feedback (DSF), giving the controller position data for closed-loop regulation. Power and encoder conductors exit on the right side through a single industrial connector, which can help when space on the left is limited. The connection type is a circular connector that keeps the wiring interface compact.
Static holding requirements are covered by an integrated blocking brake that supplies 3.0 Nm of torque when release voltage is removed, preventing back-driving on vertical axes. The motor belongs to size 065 and has length code C, which corresponds to the stack height used for this frame. A fully machined plain shaft and an installed shaft seal help keep lubricant inside the host machine while limiting the entry of airborne particles. Standard housing and rotor balancing reduce vibration during operation. The motor also has no side-B shaft end, which leaves the non-drive side compact and simplifies coupling alignment.
