MDD065C-N-040-N2L-095PR0
The MDD065C-N-040-N2L-095PR0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts regulated current from an inverter into shaft rotation for coordinated motion tasks in automated machinery. The design supports closed-loop positioning, speed control, and repeatable torque delivery in handling, assembly, and transfer systems. Its compact format suits installations where motor space is limited but accurate motion is still required.
Its mechanical envelope follows size code 065 with length designation C, giving the motor a compact body for lighter load axes. A centering flange diameter of 95 mm positions the motor concentrically against gearboxes or mounting plates, while standard balancing and a standard housing help reduce vibration during high-speed operation. At standstill, the motor can supply 2.1 Nm of continuous torque. It reaches a nominal speed of 4000 rpm when commanded by the drive. Digital servo feedback on the rear connector returns high-resolution position data, and a factory-installed shaft seal helps keep dust and coolant out of the bearing chamber.
Electrical and feedback leads exit on the right side through a coded connector, which simplifies cable routing inside narrow cabinets and keeps the connection point easy to access. The shaft is machined with a keyway so torque can be transmitted to pulleys or couplings without slip. Because the unit is supplied without a blocking brake, any static holding action must be provided by the drive or external mechanics. The motor uses a single-ended shaft on side A, so no second shaft extension is present on side B. This layout saves space at the non-drive end and can help where adjacent machine components limit clearance.
