MDD065C-N-060-N2L-095GL1
The MDD065C-N-060-N2L-095GL1 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers where precise torque and velocity loops are required in industrial automation equipment such as pick-and-place axes, packaging stations, and printing lines. The motor converts electrical commands from the drive into mechanical rotation, providing a compact actuation element that can be mounted directly into machine frames without intermediate gearboxes. This arrangement supports direct installation in equipment that requires accurate motion and a compact motor package.
The rotor is balanced to a standard grade, and a centering pilot of 95 mm aligns the housing on the mounting face. Power and feedback conductors exit on the left side through a sealed connector, simplifying cable routing in tight cabinets. Under rated conditions, the shaft reaches 6000 rpm while delivering a continuous standstill torque of 2.1 Nm; this level indicates how much static load the axis can hold without exceeding thermal limits. Position data is returned through digital servo feedback (DSF), allowing the drive to close high-resolution control loops. The sealed connection also helps protect the electrical interface during operation.
A blocking brake is integrated and can develop 3.0 Nm to secure vertical or suspended loads whenever the drive is disabled. The frame follows motor length code C within the 65 mm diameter family, giving a moderate stack height for machines that require a short overall length. Size designation 065 corresponds to the flange pattern and winding set used for this motor. The motor uses a plain shaft with a shaft seal to limit lubricant ingress from adjacent gear stages. The design omits a side-B shaft end, reducing mass and minimizing bearing overhang while keeping enclosure dimensions consistent across the series. The standard housing supports a uniform external form that fits common mounting layouts in this motor line.
