MDD065C-N-060-N2L-095GR1
The MDD065C-N-060-N2L-095GR1 is a synchronous servo motor produced by Bosch Rexroth Indramat for use with digital drive controllers in automated machinery. It belongs to the MDD Synchronous Motors series and serves as a rotary actuator that converts drive current into precise mechanical motion for indexing tables, pick-and-place axes, and other position-controlled stations. As a motor matched to closed-loop control, it supports high-speed cycles and consistent torque delivery while using a compact frame that fits multi-axis equipment. This arrangement allows the drive to regulate speed and position with repeatable response during frequent start-stop motion.
The rotor is dynamically balanced to the standard grade, and a centering pilot of 95 mm assists concentric alignment on the machine housing. Power and feedback cabling exit on the right side through a molded connector, which helps cable routing in tight panels. Continuous torque at standstill is rated at 2.1 Nm, while nominal operating speed reaches 6000 rpm for rapid traverse. A blocking brake is fitted, and its holding torque of 3.0 Nm maintains position during emergency stops or power loss. The plain housing and standard cooling surface enable natural convection, and internal Hall/EMF sensors provide commutation data to the controller for smooth acceleration.
The motor uses a plain shaft that mates directly with backlash-free couplings, and a shaft seal protects the front bearing from splash and ambient dust. Position data is returned through integrated digital servo feedback, which eliminates the need for an external encoder and simplifies wiring. The motor has size code 065, and length code C indicates the stack height used for higher torque density. It has a single-ended shaft with no extension on side B, which helps preserve clearance near adjacent machine components. The connection hardware uses a keyed connector for secure mating.
