MDD065C-N-060-N2L-095PA0
The MDD065C-N-060-N2L-095PA0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into fast, closed-loop rotary motion in pick-and-place stations, feeders, and other automated axes. The unit belongs to motor size 065, which gives it a compact footprint while supporting the torque density needed in light-duty process equipment. It uses standard rotor balancing and a standard housing for straightforward integration into machine frames. Its synchronous design also supports accurate speed and position control during repeated starts, stops, and reversals.
At standstill, the motor delivers a continuous torque of 2.1 Nm, allowing steady holding force without thermal overload. When driven by a compatible inverter, it reaches a nominal mechanical speed of 6000 rpm, which suits high-throughput indexing tables and other fast-moving axes. Installation alignment is aided by a 95 mm centering diameter that mates with standard servo flanges. Position data returns to the controller through digital servo feedback, allowing precise commutation and stable closed-loop operation. Power and feedback leads exit on side A through a molded connector, which helps keep cable routing compact. The shaft uses a keyway so pulleys or couplings can be secured against slip during rapid reversals.
The motor has length code C, so the housing provides the space needed for the 060 winding while helping keep inertia low. The output shaft is supplied without a side-B extension, which reduces axial space and leaves the opposite end clear in tight machine layouts. The unit is delivered without a holding brake, so any required load holding must be provided by the drive or by external hardware. The front bearing region is equipped with a shaft seal, which helps limit contaminant ingress at the drive end. This arrangement supports use in machines that need compact installation and clean mechanical coupling.
