MDD065C-N-060-N2L-095PL0
The MDD065C-N-060-N2L-095PL0 synchronous motor is produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts inverter output into controlled mechanical rotation for axes that require fast and accurate motion in industrial automation. The type code indicates a size 065 motor with length code C, which gives it a compact profile for pick-and-place heads, small packaging spindles, and light gantry axes. A standard housing and a keyed shaft end support direct connection to pulleys or couplings without additional machining.
Under continuous stall conditions, the rotor delivers 2.1 Nm of torque, providing stable holding force while the drive maintains current. During motion, it reaches a nominal speed of 6000 rpm, which supports rapid indexing cycles when paired with a suitable inverter. Position data is returned through digital servo feedback, allowing the controller to monitor motor movement during closed-loop operation. The rotor and hub use standard balancing, which helps limit vibration at high speed and reduces stress on adjacent mechanical parts. Power and feedback connections are routed through a single connector on the housing, which keeps wiring compact and simplifies cable routing.
Cable entry is oriented to the left, which can help when the motor is installed in tight spaces with limited routing clearance. The flange centering pilot measures 95 mm, helping the motor seat accurately on the machine interface and maintain proper alignment. The output shaft is supplied with a shaft seal, which helps limit the migration of oil or contaminants along the shaft. The motor is supplied without a blocking brake, so holding force at standstill must be provided by external equipment or by drive-controlled torque. The shaft is provided only on side A, and the housing follows the protection level used for this motor series.
