MDD065C-N-060-N2L-095PL1
The MDD065C-N-060-N2L-095PL1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Supplied for direct connection to digital drive controllers, the unit converts precisely timed current commands into regulated rotary motion for automated equipment. It is intended for positioning duties on packaging lines, assembly cells, and material-handling axes where repeatable speed and torque are necessary for consistent cycle times. Because the motor is paired with a digital controller, speed changes and position corrections can be applied quickly during short, repetitive machine cycles. This makes the unit suitable for indexing stations, feeders, and transfer axes that must start and stop smoothly throughout normal operation.
The motor integrates with a drive system through several electrical and mechanical ratings. The nominal speed of 6000 rpm sets the upper synchronous velocity the shaft can reach under rated excitation, supporting quick indexing cycles. A continuous standstill torque of 2.1 Nm shows the torque the stator can sustain indefinitely without overheating when the rotor is locked. Accurate flange alignment is aided by a centering diameter of 95 mm, which keeps the motor concentric with machine bearings during installation. All power and feedback conductors exit on the left side, which simplifies cable routing when multiple axes are mounted in a row. Integrated digital servo feedback (DSF) transmits high-resolution position data to the controller, enabling tight closed-loop regulation without a separate external encoder. That feedback arrangement also helps the drive monitor actual rotor position during acceleration, deceleration, and dwell periods.
A blocking brake rated at 3.0 Nm clamps the rotor when power is removed, helping prevent load drift on vertical or suspended mechanisms. The machined shaft uses a keyway, so pulleys or couplings can transfer torque without relying only on clamping friction. A fitted shaft seal helps keep contaminants away from the bearing cavity and preserves lubrication in dusty or damp areas. The compact motor size 065 limits mass and footprint, which is useful where mounting space is restricted and moving components must stay light for responsive axis motion. These features support applications that require secure holding at rest, dependable torque transmission, and a compact installation envelope.
