MDD065C-N-060-N2L-095PR0
The MDD065C-N-060-N2L-095PR0 is a synchronous servo motor built by Bosch Rexroth Indramat and delivered within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into precise rotary motion for positioning tables, pick-and-place axes, and other closed-loop automation tasks. By pairing with compatible drive modules, the unit supplies rapid acceleration and speed regulation without mechanical gearing, making it suitable for compact machine layouts that require high cycle rates and repeatable performance.
A nominal speed of 6000 rpm is the upper continuous operating velocity, so the drive can match high-frequency command profiles without overshooting. At standstill, the motor generates 2.1 Nm of continuous torque, providing holding force for load-bearing axes when motion is paused. Position data is returned through digital servo feedback (DSF), enabling the controller to close the velocity and position loops with single-turn accuracy. Mechanical alignment during installation is simplified by a 95 mm centering diameter that mates directly with standard flange bores. Power and feedback conductors exit on the right side, allowing consistent cable routing inside a cabinet. The rotor uses standard balancing, which helps limit vibration and supports smooth running at elevated speeds.
The motor is shipped without a blocking brake, so braking or holding force must be provided by the drive or an external brake when power is removed. The output shaft has a keyway, providing positive torque transfer to pulleys or couplings. A dedicated shaft seal sits behind the front bearing to help prevent oil mist or coolant from entering the housing, supporting reliable operation in machining centers and packaging environments where airborne fluids are common.
