MDD065C-N-060-N2M-095GL0
The MDD065C-N-060-N2M-095GL0 is a synchronous servo motor produced by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. It is intended for use with digital drive controllers in industrial automation. The unit supplies closed-loop torque and velocity control, transferring precisely framed commands from motion controllers into real-time mechanical rotation on compact axes, pick-and-place heads, or light conveyor segments in automated machinery where repeatable motion is required.
At a nominal speed of 6000 rpm, the rotor can sustain repetitive cycles without leaving the linear control range of the associated drive. During standstill, it delivers a continuous torque of 2.1 Nm, so position holding under load can be handled electrically rather than by mechanical locks. A centering diameter of 95 mm aligns the flange to machine frames and helps keep radial runout within acceptable limits. Power, sensor, and brake leads exit on the left side, which influences cabinet layout and cable routing in multi-axis installations. Position data is returned through digital servo feedback (DSF), giving the drive detailed information for current loop closure and commutation during indexing moves and frequent starts.
The motor body follows a standard balancing quality and uses a sealed housing to prevent lubricant leakage into the stator cavity. Motion is transferred through a plain shaft, which simplifies coupling to pulleys or bellows couplings. Control wiring mates to a connector rather than flying leads, which keeps the electrical interface compact and orderly. Because the unit is supplied without a blocking brake, axis restraints must be provided externally when power is removed. Multi-turn position capture is handled by an integrated multi-turn absolute encoder, allowing the controller to recover the rotor angle after restart without homing moves.
