MDD065C-N-060-N2M-095GR0
The MDD065C-N-060-N2M-095GR0 is a permanent-magnet synchronous motor produced by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. It is intended for use with digital drive controllers where precise velocity and position regulation are required on automated axes, packaging equipment, and material-handling stations. As an electromechanical actuator, the motor converts controlled electrical power into rotary motion that can be coupled to belts, gearboxes, or lead screws in industrial machinery. This arrangement supports repeatable starts, stops, and speed changes in applications that depend on accurate axis movement.
Its nominal shaft speed is 6000 rpm, which allows fast operating cycles on high-speed axes. The motor provides a continuous standstill torque of 2.1 Nm, so it can hold load at zero speed within its continuous thermal range. A centering shoulder of 95 mm helps align the housing with the machine mounting surface. Power and feedback conductors exit on the right side, and the motor uses a connector interface for attachment. Standard rotor balancing helps limit vibration at rated speed, and motor length code C indicates the third housing length in the 065 frame. The motor is supplied without a blocking brake, so any holding function for vertical loads must come from external equipment when power is removed.
Feedback is provided through digital servo feedback, which sends position data to the controller for closed-loop operation. An integrated multi-turn absolute encoder preserves shaft position information over multiple revolutions, which supports accurate startup and position tracking. The output uses a plain shaft, making it suitable for direct coupling with matching machine elements, and a shaft seal helps keep lubricant in place while limiting contaminant entry. The housing uses a standard closed design, the 065 motor size suits compact machine layouts, and the omission of a side-B shaft end helps keep the overall motor length shorter.
