MDD065C-N-060-N2M-095PL0
The MDD065C-N-060-N2M-095PL0 is a synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is supplied for use with digital drive controllers and is intended to convert commanded current into rotary motion for positioning and velocity tasks in automated machinery. A standard housing, standard rotor balancing, and a connector-based power interface make the unit easy to install beside other servo axes on multi-axis gantries, pick-and-place heads, or packaging lines.
The motor can deliver a continuous standstill torque of 2.1 Nm. This figure represents the sustained torque the stator windings can produce without exceeding thermal limits. Once energized, the rotor can reach a nominal speed of 6000 rpm, which sets the top repeatable operating speed for production cycles. A centering diameter of 95 mm provides the pilot fit that aligns the flange to the machine frame and helps keep radial runout in check. Cabling exits on the left side, so panel layouts must leave clearance on that face for the connector. Position and speed feedback are transferred through digital servo feedback, allowing the associated drive to resolve rotor angle at high resolution for tight closed-loop regulation.
An Integrated multiturn absolute encoder counts multiple revolutions even when external power is removed, eliminating homing routines after a shutdown. Shaft protection is provided by a design that ships with a shaft seal, limiting oil or coolant ingress along the journal. The unit is supplied without a blocking brake, so holding torque must be generated electrically or through external latching when the axis is idle. Power is transmitted through a keyway shaft end, matching standard keyed couplings and simplifying the interchange of pulleys or gear wheels in modular machinery.
