MDD065C-N-060-N2M-095PR0
The MDD065C-N-060-N2M-095PR0 is a synchronous servo motor produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for pairing with the manufacturer’s digital drive controllers, the unit provides closed-loop motion for compact machining centers, pick-and-place heads, and indexing tables. It supplies continuous torque while maintaining precise position feedback, making it suitable for axes that must accelerate rapidly and then hold exact positions under load.
At a nominal speed of 6000 rpm, the rotor can deliver velocity appropriate for high-cycle applications. Continuous stall torque reaches 2.1 Nm, indicating how much load the axis can hold without overheating when motionless. Mechanical alignment during installation relies on a centering diameter of 95 mm, which seats the housing accurately against the machine frame. Power and feedback conductors enter from the right side and use a connector interface, simplifying cable routing in tight cabinets. Standard factory balancing keeps residual vibration within ISO limits, and the C-length stator provides additional active stack length over shorter variants for improved output density.
The motor’s position loop is closed through Digital servo feedback, and absolute position is available immediately at power-up because the rotor angle is reported by an integrated multiturn absolute encoder. A keyway on the shaft end transmits torque without slippage, while the front bearing region is protected by construction that is supplied with a shaft seal to keep lubricants in and contaminants out. The housing is the standard uncooled style, and the absence of a blocking brake means external clamping or drive torque must hold the load when power is removed. The motor uses size code 065 and length code C for dimensions compatible with the series mounting surfaces.
