MDD065D-N-060-N2L-095GL0
The MDD065D-N-060-N2L-095GL0 is a synchronous servo motor produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It is designed for use with digital drive controllers where rapid speed changes and precise positioning are required in industrial automation lines. The motor uses frame size 065 with D length, has standard housing and rotor balancing, and is built as a single-ended model without a secondary shaft on side B, making it suitable for compact axis modules and light pick-and-place gantries.
This motor delivers a continuous standstill torque of 2.7 Nm, which indicates the load it can hold at zero speed without exceeding its thermal limit. During operation, it can reach a nominal speed of 6000 rpm, giving short-cycle machines adequate headroom for high spindle or feeder speeds. Accurate mechanical alignment is simplified by the 95 mm centering diameter, which mates with matching pilot features on gearboxes or mounting plates. Power and feedback leads exit to the left side of the housing, so surrounding equipment must allow clearance in that direction. Electrical terminations are completed through a sealed connector, which simplifies cable connection without opening the drive enclosure.
Position verification is handled by integrated digital servo feedback, which provides fine-resolution signals to the controller for tight velocity loops and smooth interpolation. A protective shaft seal limits dust or coolant ingress along the rotating member, helping protect the bearing area in production cells. The motor uses a plain shaft profile, allowing couplings or pulleys to clamp directly without keyway stress risers. Because it is supplied without a blocking brake, applications that require static holding torque during power-off must rely on external clamping or maintained drive current.
