MDD065D-N-060-N2L-095GR1
The MDD065D-N-060-N2L-095GR1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for digital drive controllers, it delivers controlled speed and position in automated machining cells, pick-and-place stations, and packaging axes where repeatable motion is required. The model uses a standard housing, follows motor length code D, and fits the 65 mm frame class, so it works well in compact machine layouts with limited mounting space. It uses a plain shaft that ends only on side A, and an integrated blocking brake helps hold vertical loads when power is removed.
The rotor can turn at a nominal rate of 6000 rpm, which suits high-throughput spindle and axis applications that require fast cycle times. When stationary and energized, it can hold a continuous torque of 2.7 Nm, supporting low-speed cutting, indexing, and positioning tasks that need steady output at low shaft speed. For stopping and holding, the blocking brake supplies 3.0 Nm of holding torque to resist back-drive when the motor is not being driven. Accurate alignment to adjoining machinery is supported by a centering diameter of 95 mm, and the compact 065 frame helps the motor fit dense multi-axis arrangements. This arrangement helps keep coupling alignment consistent during installation and normal operation.
Power and feedback leads exit on the Right side through a single connector, which helps reduce cable crowding in tight cabinets and on closely spaced machine axes. Position data travels over Digital servo feedback (DSF), allowing the connected controller to process rotor position and speed with high resolution for closed-loop operation. This feedback method avoids separate analog tacho wiring. A shaft seal helps retain lubricant within the bearing area and reduces the entry of airborne contaminants. The motor also uses standard balancing to help limit vibration as speed increases and to support smooth rotation.
