MDD065D-N-060-N2L-095PL0
The MDD065D-N-060-N2L-095PL0 synchronous motor is manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is specified as a motor for digital drive controllers, confirming that it receives current from an external inverter rather than being connected directly to the mains. The unit’s purpose in industrial automation is to deliver precisely regulated rotary motion for coordinated axes in material-handling equipment, packaging lines, and light machining centers where speed stability and position repeatability are required.
The motor has a nominal speed of 6000 rpm, allowing fast cycle execution without mechanical gear multiplication. At standstill it can supply 2.7 Nm of continuous torque, which gives the axis steady force for holding or low-speed moves while thermal limits are observed. A centering diameter of 95 mm provides the locating surface that aligns the stator with the adjacent machine frame, and a hardened keyway on the shaft transmits torque to pulleys or couplings without slippage. Position and velocity are closed through digital servo feedback, enabling the drive to monitor rotor angle with high resolution and correct deviations within each control loop.
The motor is delivered without a blocking brake, so external measures must secure vertical loads during power loss. A bonded shaft seal helps block dust and coolant from entering the front bearing, and the standard housing can meet IP65 when matched connectors are installed by the user. Power and feedback lines exit on the left-side connection, which can ease cable routing when cabinets are arranged to the right of the axis. The construction uses length code D, the longest frame within the 065 size class, increasing active iron length for higher torque while keeping the standard shaft end on side A.
