MDD065D-N-060-N2M-095GL1
The MDD065D-N-060-N2M-095GL1 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It serves as a drive element in systems that use digital drive controllers, converting electrical command signals into rotary motion with tightly regulated speed and torque. The motor fits installations where space is limited, yet rapid positioning and repeatable velocity are essential for automated machine axes, pick-and-place heads, or packaging spindles.
A centering diameter of 95 mm aligns the flange, while standard balancing helps limit vibration during high-speed operation. Electrical and feedback plugs exit on the left side, which can simplify cable routing when the motor is mounted on a carriage. Under static conditions, the shaft can supply 2.7 Nm continuously without overheating, and the integrated brake provides 3.0 Nm of holding torque to keep the axis in place when power is removed. During motion, the rotor can reach 6000 rpm, making it suitable for rapid index cycles. The motor uses standard housing and shaft-end designs, and its length code D gives it an active stack that balances torque output with reduced mass.
Rotor position is measured by an integrated multi-turn absolute encoder, which reports position across multiple revolutions. Data are transmitted through Digital servo feedback (DSF), so the drive controller receives high-resolution information without analog drift. The motor uses a plain shaft with an installed shaft seal, which helps protect the interior from fine dust or coolant mist. Frame designation 065 identifies the stator diameter used for this motor size. Cable attachment relies on a keyed connector, and the blocking brake is factory fitted to maintain axis position when the system is not energized.
