MDD065D-N-060-N2M-095GR0
The MDD065D-N-060-N2M-095GR0 is a synchronous servo motor produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It serves as the electromechanical actuator in digitally controlled drive systems, converting commanded current from the drive into controlled rotary motion for positioning tables, small conveyors, or gantry axes. When paired with a compatible drive controller, the motor provides precise velocity and position regulation without requiring mechanical transmissions or external feedback devices.
During continuous operation at standstill, the motor can supply 2.7 Nm of torque, giving machines enough holding force for static loads without overheating. When the winding excitation is increased, the rotor can accelerate to its nominal speed of 6000 rpm, enabling short cycle times in high-throughput stations. A centering diameter of 95 mm provides the pilot fit on the mounting flange and helps maintain coaxial alignment with gearboxes or direct-coupled loads. Position data flow is handled over digital servo feedback, allowing the drive to read rotor position during every control cycle. This feedback is supplied by an integrated multiturn absolute encoder, so homing routines are unnecessary after power interruptions and multi-turn positions remain available.
The mechanical interface uses a plain shaft, allowing the use of friction-locked hubs or shrink discs instead of keyed couplings. The motor is supplied with a shaft seal, which helps block contaminants at the shaft outlet during operation. The rotor uses standard balancing, which minimizes residual unbalance for smooth rotation across the full speed range. Cable routing is simplified by the right-side connector orientation, permitting tight side-by-side mounting of multiple motors along a common machine wall while keeping power, brake, and feedback plugs accessible. The motor length coded D and the absence of a blocking brake help reduce mass and inertia for fast dynamic response.
