MDD065D-N-060-N2M-095PA0
The MDD065D-N-060-N2M-095PA0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor matched to digital drive controllers, it converts command signals into controlled rotary motion so that compact positioning tables, pick-and-place heads, or feeder rolls can follow repeatable motion profiles in automated lines. Its synchronous design supports accurate speed regulation and responsive positioning in applications that require frequent starts, stops, and reversals. Paired with a compatible drive, it can handle both short indexing moves and steady-speed operation on the same axis.
The motor’s nominal speed is rated at 6000 rpm, which is the highest continuous shaft speed it can sustain under rated load without exceeding thermal limits. At standstill, it can deliver 2.7 Nm of continuous torque, giving machinery enough holding force for indexing or dwell periods. A centering diameter of 95 mm ensures concentric alignment with gearboxes or mounting flanges, which helps reduce radial runout. Power and feedback leads exit toward the user side because the connection hardware is oriented on Side A. The interface itself is a sealed connector that allows quick connection of prefabricated cable sets. This layout also helps keep cable routing straightforward when the motor is mounted near machine guards or linear slides.
The shaft uses a keyway profile to help prevent coupling slip during high-cycle reversals, and an integrated multiturn absolute encoder supplies rotor position data after every power cycle. The encoder communicates through digital servo feedback, allowing the drive to close position and velocity loops at high resolution. Because position information remains available after power is restored, the axis can return to controlled motion without a separate reference run in many machine layouts. A factory-installed shaft seal limits the ingress of fine dust or cutting fluid, and the motor is supplied without a blocking brake. The standard drive-side shaft end and D-length housing provide a consistent mechanical package within the MDD 065 frame.
