MDD065D-N-060-N2M-095PA1
The Bosch Rexroth Indramat MDD065D-N-060-N2M-095PA1 is a synchronous servo motor in the MDD Synchronous Motors series and serves as a motor for digital drive controllers. In automated equipment, the unit receives regulated current from a compatible drive, converts it into electromagnetic torque, and supplies repeatable rotary motion to indexing tables, pick-and-place actuators, and compact spindle heads. This arrangement supports accurate acceleration, stable low-speed running, and responsive positioning in closed-loop motion systems. Because the motor is intended for digital control, current, speed, and position loops can be coordinated by the drive to maintain smooth motion during frequent starts, stops, and reversals.
The motor has a centering diameter of 95 mm, which provides a precise pilot fit between the motor and the driven machine element. During continuous operation, it can deliver 2.7 Nm of standstill torque, allowing the axis to hold position or accelerate modest inertial loads without excessive heating. Speed commands up to 6000 rpm give the drive a broad operating range for fast indexing and short cycle times. Power and feedback conductors exit on Side A, and a keyed connector supports direct electrical connection while keeping cable routing straightforward. The motor uses standard balancing, and the shaft is arranged as a single-ended version for common coupling or pulley installations. This layout is useful where available mounting space is limited but repeatable alignment and clean cable entry are still required.
A blocking brake rated at 3.0 Nm holds the rotor when the motor is idle or when power is removed, which helps prevent unwanted axis movement. Position data is supplied by an integrated multi-turn absolute encoder, and the drive exchanges this information through digital servo feedback for commutation and position control without manual phasing. The output shaft uses a keyway for positive torque transmission, and a shaft seal helps reduce dust or coolant entry near the bearing area. The 065 frame size with length code D gives the motor a compact installation length that fits tightly spaced machinery. This combination is useful on vertical axes and other applications that require retained position and reliable feedback during stopping.
