MDD065D-N-060-N2M-095PL1
The MDD065D-N-060-N2M-095PL1 is a compact three-phase servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It works with digital drive controllers and converts regulated current into controlled rotary motion for automated axes. Standard dynamic balancing helps reduce residual vibration during operation, and the keyed shaft end can connect directly to pulleys or light gear trains. Because feedback is built into the motor, the paired drive can correct speed changes caused by load variation during operation. That combination suits assembly cells, conveyor stations, and small machine-tool spindles that need stable speed control and short indexing moves.
The motor delivers a continuous standstill torque of 2.7 Nm, so it can hold load at zero speed without overheating under continuous duty. Its rated speed is 6000 rpm, which supports quick positioning cycles while remaining within intended operating limits. A centering shoulder of 95 mm helps align the housing concentrically on the machine interface and reduces runout at the coupling. The integrated blocking brake provides 3.0 Nm of static holding torque during power loss. Power and feedback connectors exit on the left side, which helps when cable routing is planned toward fixed trays or cabinet entries in that direction.
The motor uses frame size 065 with length code D, giving it an extended active section while keeping the same general mounting pattern for this housing style. Position feedback comes from an integrated multiturn absolute encoder, so shaft position remains available after shutdown and the axis does not need a homing cycle on every restart. A fitted shaft seal helps keep dust and lubricant away from the front bearing area. Digital servo feedback transmits the position signals directly to compatible inverters for closed-loop velocity and position control. This arrangement supports repeatable startup after interruptions and reduces the need for manual re-referencing.
