MDD065D-N-060-N2M-095PR0
The MDD065D-N-060-N2M-095PR0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers in automated machinery, where it converts electrical power into precisely regulated rotary motion for positioning, feed, or spindle axes. This operating profile suits machines that require repeatable speed control and accurate positioning during continuous production. The motor uses the modular format of the series, which supports integration into multi-axis industrial systems.
The motor has a nominal speed of 6000 rpm, which supports high-velocity interpolation in light machining or pick-and-place duties. At standstill, it can sustain 2.7 Nm of continuous torque, giving the attached mechanics stable low-speed output without exceeding thermal limits. The stator and flange share a 95 mm centering diameter, so alignment to gearboxes or mounting fixtures remains consistent. Position data is provided through digital servo feedback with an integrated multi-turn absolute encoder, allowing position recovery after power loss and fine loop resolution at the drive. The motor uses frame size 065, which keeps the outer diameter compact while still providing space for the required winding volume.
Power and feedback conductors exit on the right side through a push-fit connector, which helps keep cable routing orderly along the machine wall. The rotor stack uses length code D, which adds axial copper while keeping weight moderate. A shaft seal protects the output end, and the single-ended shaft uses a keyway for coupling to pulleys or pinions. The housing follows the standard closed-frame pattern, and the motor is dynamically balanced to a standard grade to limit vibration at full speed. Because the motor is supplied without a blocking brake, external clamping must be used when power is removed.
