Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of MDD071A-N-030-N2S-095GA0

MDD071A-N-030-N2S-095GA0

by Bosch Rexroth Indramat
Request a quote
The Bosch Rexroth Indramat MDD071A-N-030-N2S-095GA0 is an AC digital servomotor designed for highly dynamic applications and high-speed cutting tasks. It demands expert installation by a trained electrician. With its high synchronization and electronic commutation attributes, this servomotor works best outside the 45°C to 55°C range. This highly protected device (IP 65 rating on the output shaft) features Class F insulation and excludes a blocking brake connection. It endorses different continuous currents and torques in standstill mode with different cooling methods. As per DIN IEC 34-7 specifications, it offers three mounting possibilities. Further, it avoids a mounting flange with threads, and requires no liquid accumulation at the output shaft. Achieving non-positive shaft-hub connections, the motor is enforced by radial or axial forces. Finally, ensure the motor shaft is not thermally stressed to avoid damage to bearing Side B. Shipment for this servomotor is available worldwide.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Code: MDD071A-N-030-N2S-095GA0
  • Product Type: digital AC servomotor
  • Protection Covers: Plastic protection covers on output shaft and connector housing
  • Usage: Used for highly dynamic applications
  • Operation: Supports cutting in high-speed ranges, high level of synchronization, supports electronic commutation
  • Motor Shaft: Facilitates non-positive shaft-hub connections
  • Operation Temperature Limit: Reduced performance between 45°C and 55°C
  • Protection Standard: IP 65 degree for output shaft with a shaft sealing ring
  • Flange: Incompatible with a mounting flange featuring threads
  • Longitudinal Axis Amplitude: Maximum of 0.3mm with sinusoidal oscillations
  • Brake Connection: Lacks blocking brake connection
  • Insulation Classification: Class F
  • Cooling: Supports surface cooling and natural convection
  • Mounting: Possible in three ways according to DIN IEC 34-7 specifications
  • Output Shaft Condition: No liquid accumulation for extended durations
  • Mounting Flange Diameter: standard pilot diameter of 95mm
  • Load Impact: Radial or axial forces affect motor shaft
  • Thermal Stress Impact: May damage bearing to Side B
  • Balance: Reduced balance class
  • Shipping: Worldwide.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204