MDD071A-N-060-N2S-095GB2
The MDD071A-N-060-N2S-095GB2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it interfaces directly with compatible drive modules to actuate rotary axes in packaging, printing, and material-handling equipment. Its standard housing and compact A-length construction allow installation where mounting space is limited while still supporting continuous industrial operation. This arrangement makes the motor suitable for applications that require accurate motion control without adding unnecessary bulk to the machine layout.
The motor’s centering flange has a diameter of 95 mm, giving a precise reference surface for alignment with gearboxes or machine frames. The designation 071 identifies the motor size used in this housing. At a nominal speed of 6000 rpm, the rotor can provide a continuous standstill torque of 2.2 Nm, which supports holding force and low-speed indexing duties. Position and velocity loops are closed with digital servo feedback (DSF), allowing the controller to receive the signals needed for accurate commutation and motion regulation. Electrical connections are arranged on side B, and the plain single-ended shaft supports straightforward coupling to the driven load.
Mechanical stability is supported by a standard balance grade and a fitted shaft seal that helps limit lubricant migration when the motor is mounted vertically. A blocking brake is integrated, and its static holding capacity is 6.5 Nm, so the axis can remain fixed during power loss or emergency stops without depending only on drive torque. Power and feedback lines are routed through a keyed connector, which helps maintain secure mating and consistent shielding continuity. The keyed connection also helps prevent incorrect cable orientation during installation, and the sealed shaft area supports use in machinery where cleanliness around the bearing zone is important.
