MDD071A-N-060-N2S-095GL1
The MDD071A-N-060-N2S-095GL1 belongs to the MDD Synchronous Motors series produced by Bosch Rexroth Indramat. It is a compact brushless servo motor intended for digital drive controllers where rapid positioning, velocity control, and repeatability are required on automated machines. By integrating into closed-loop servo axes, the unit converts electrical commands into precise mechanical rotation for packaging, material-handling, and light machining lines. This operating concept lets the drive compare commanded motion with actual rotor response and adjust current quickly during acceleration, deceleration, and steady running. That helps keep motion smooth when the axis follows changing load conditions.
This motor reaches a nominal speed of 6000 rpm, enabling high cycle frequencies in applications that demand quick acceleration and short indexing times. It provides a continuous standstill torque of 2.2 Nm, so the shaft can sustain a steady stationary load without excessive thermal buildup under rated conditions. Accurate mechanical alignment is aided by the 95 mm centering diameter, which matches common mounting flanges. Power and feedback conductors exit on the left side, and the single-piece connector keeps the electrical interface compact. The motor also has a plain shaft end without a side-B extension, standard balancing to reduce vibration, a standard housing for general industrial use, and length code A for a short overall depth.
For static load holding, the integrated blocking brake supplies 3.0 Nm of torque when power is removed. Position and velocity data are returned through digital servo feedback, allowing the controller to correct motion errors during each control cycle and maintain stable axis behavior. The motor uses frame size 071, which suits compact machine layouts where space around the drive train is limited. A protective shaft seal helps limit the entry of fine dust and lubricants at the output end. Stable feedback and brake operation are useful on axes that make frequent starts, stops, and speed changes.
