MDD071A-N-060-N2S-095GR1
The MDD071A-N-060-N2S-095GR1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts commanded current into precise torque and speed for packaging gantries, pick-and-place heads, and indexing tables. This arrangement supports accurate axis motion in applications that require repeatable positioning and responsive control. It is suited to servo systems that need stable motion during both low-speed regulation and rapid axis movement.
The motor provides a continuous standstill torque of 2.2 Nm, so it can hold or drive a load at zero speed without excessive heating under rated conditions. During operation, it reaches a nominal speed of 6000 rpm, which supports fast positioning on compatible servo axes. The housing uses a centering pilot of 95 mm to align the motor accurately with the machine interface. Power and feedback cables connect through a connector on the right side, which can simplify routing when the installation layout favors that exit direction. Closed-loop commutation and position tracking are handled by digital servo feedback (DSF), allowing the drive to monitor rotor position continuously.
A blocking brake rated at 3.0 Nm secures the shaft when power is removed, which is useful on vertical or intermittent-load axes. The motor uses a plain shaft with a shaft seal in the standard configuration, helping limit contaminant entry while supporting direct coupling arrangements. It has a motor size of 071 and a length code of A, which indicate a compact frame with a short stack in this model family. The motor has a single shaft end, so there is no output extension on side B. A circular connector interface is used for secure cable attachment, and the standard housing supports direct mounting on compatible machine surfaces.
