MDD071A-N-060-N2S-095GR2
The MDD071A-N-060-N2S-095GR2 belongs to the MDD Synchronous Motors series and is supplied as a compact servo unit for digital drive controllers in automated machinery. It converts commanded drive current into precise rotary motion for axis positioning and speed regulation in material-handling stations, small machining centers, and packaging lines where coordinated multi-axis control is required. This makes it suitable for compact axes that need accurate starts, stops, and speed changes during repetitive production cycles. Its compact form also helps it fit into machine assemblies where installation space is limited.
The rotor can run at a nominal speed of 6000 rpm, which supports fast indexing and short cycle times. At standstill, it can deliver 2.2 Nm of continuous torque, which reflects the thermal capability of the stator windings under steady excitation. Alignment during installation is aided by a 95 mm centering diameter that matches common motor flanges. Position and velocity data are returned through digital servo feedback, allowing the drive to close its control loop without an external encoder. This feedback arrangement lets the controller monitor rotor position and velocity in real time for stable low-speed regulation and accurate command tracking. Power and signal cables exit on the right side and terminate through a keyed connector. The motor uses a plain shaft, allowing direct coupling to pulleys or flexible couplings.
For static holding or emergency stops, the integrated brake supplies 6.5 Nm of torque and engages automatically when the drive is disabled. Because the brake is built into the motor, the axis can remain secured when power is removed or when motion is intentionally stopped between machine steps. A fitted shaft seal protects the front bearing from coolant splash and fine dust. Dynamic balance follows the standard series grade to help limit vibration at operating speed. The A-length frame keeps overall depth low where installation space is limited, and motor size 071 is used with matching drive modules that support the required current, thermal model, and feedback processing.
