MDD071A-N-060-N2S-095PA1
The MDD071A-N-060-N2S-095PA1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and included in the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts controlled electrical pulses into mechanical rotation for positioning and velocity tasks in automated machinery that depends on stable closed-loop control during repetitive production cycles. The unit combines a compact frame with the A length code and 071 size designation, so it fits narrow axis modules while still supplying the speed often required for pick-and-place arms, packaging stations, and light machining spindles where fast, repeatable motion is needed.
At its nominal operating point, the rotor reaches 6000 rpm, allowing tight cycle times when paired with high-frequency inverters. A continuous torque of 2.2 Nm is available at standstill, giving the drive sufficient holding force for static loads without overheating. A centering diameter of 95 mm aligns the flange with adjoining mechanical structures and helps maintain balance within the standard housing. Feedback is handled by digital servo feedback (DSF), which sends position data to the control loop for very fast corrections. Power and encoder leads exit on side A, so cables can be routed away from moving parts and crowded machine surfaces.
Dynamic stops are assisted by a blocking brake that supplies 3.0 Nm of torque. The motor also includes a shaft seal, which helps limit contamination at the output end. The electrical interface relies on a connector, which simplifies cable attachment and keeps the connection compact. The motor uses a single-ended shaft with a keyway to transmit torque directly to couplings and help prevent slip in intermittent start-stop duty. Standard balancing limits residual vibration and supports smooth operation over repeated motion cycles in automated equipment.
