MDD071A-N-060-N2S-095PL0
The MDD071A-N-060-N2S-095PL0 is a synchronous servo motor produced by Bosch Rexroth Indramat and assigned to the MDD Synchronous Motors series. It is intended for direct coupling with digital drive controllers, where it converts commanded current into rotational motion for positioning axes and high-speed spindles in automated equipment. The design uses compact stator dimensions and encoder-based feedback so machines can maintain precise velocity loops while occupying minimal installation space.
A centering diameter of 95 mm locates the flange concentrically, ensuring shaft alignment without additional sleeves. At standstill, the rotor can develop 2.2 Nm of continuous torque, allowing the axis to hold tooling or light fixtures without overheating. Once energized, the motor reaches a nominal speed of 6000 rpm, giving ample headroom for rapid point-to-point moves in pick-and-place or packaging modules. The frame belongs to size code 071, a footprint that balances mass and inertia for midsized gantry or conveyor stations. Rotor and stator are balanced to a standard grade, so additional field trimming is usually unnecessary when the keyed shaft is coupled to symmetric loads.
The electrical terminations exit on the left side through a sealed connector, while position data is returned by integrated digital servo feedback, eliminating the need for separate tacho wiring. A keyway on the shaft simplifies coupling to hubs or pulleys and helps prevent rotational slippage under reversal. For applications that rely on external mechanical holding devices, the motor is supplied without a blocking brake. An axial lip fitted behind the front bearing forms an oil barrier, and the motor is built with a shaft seal so internal lubrication does not leak into the workspace even when the housing is mounted vertically. Motor length code A and a standard housing finish suit general-purpose indoor environments.
