MDD071A-N-060-N2S-095PL1
The MDD071A-N-060-N2S-095PL1 is a Bosch Rexroth Indramat motor in the MDD Synchronous Motors series. It serves as an electromechanical actuator that receives regulated current from a compatible drive controller and converts it into controlled rotary motion for pick-and-place heads, indexing tables, and other positioning axes in automated machinery. Integrated feedback and a blocking brake allow the motor to hold or release load torque under drive command, which supports compact axis layouts without external clamping devices. This arrangement also helps the drive maintain accurate positioning during repeated starts, stops, and dwell periods.
This model uses a housing with a centering diameter of 95 mm, allowing quick alignment against standard flanges. Power and encoder conductors exit on the operator's left, and the mating interface is a sealed connector that speeds replacement without rewiring. At standstill, the motor can supply a continuous torque of 2.2 Nm, giving machinery a stable force reserve for low-speed cutting or tensioning tasks. When commanded to rated frequency, it reaches a nominal speed of 6000 rpm, which suits high-throughput applications that need short cycle times. This layout can also help keep the cable area organized where space around the motor body is limited in compact machines.
For static axis security, the integrated brake produces 3.0 Nm of holding torque, keeping vertical loads in place when power is removed. Position data is returned through digital servo feedback, allowing the drive to maintain closed-loop speed and position control during operation. The output shaft uses a keyway so torque can be transmitted directly into pulleys or couplings without slip, and a built-in shaft seal helps block coolant or dust from migrating along the journal into the bearing set. In packaging lines, textile frames, and small machine tools, the brake and feedback system support controlled stopping and accurate restart behavior during repeated production cycles.
