MDD071A-N-060-N2T-095PA2
The MDD071A-N-060-N2T-095PA2 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed to pair with digital drive controllers, this motor provides closed-loop rotary motion for positioning tables, pick-and-place heads, and other automation axes. By combining a compact frame with an internal feedback device and an integrated blocking brake, the unit delivers repeatable torque output, speed regulation, and holding force for manufacturing cells and material-handling machines.
At standstill the motor can apply 2.2 Nm continuously, allowing it to support moderate loads without overheating while motionless. During operation it can spin at a rated speed of 6000 rpm, which suits high-throughput stations that demand rapid indexing. When power is removed, the integrated blocking brake supplies 6.5 Nm of holding torque to help prevent axis drift on vertical or articulated joints. Accurate mechanical alignment is aided by the 95 mm centering diameter, which mates with correspondingly sized flanges. Electrical and feedback cables exit on side A, simplifying cable routing inside machines that mount multiple motors in series. Standard dynamic balancing minimizes vibration transmitted to bearings and attached tooling.
Power, resolver, and brake leads terminate on a rugged connector, reducing installation effort compared with pigtail wiring. Output torque is delivered through a single-ended shaft machined with a keyway, so pulleys or couplings can be secured without relying on friction alone. Position data is supplied by an integrated multi-turn absolute encoder and transmitted through digital servo feedback (DSF), so the drive can track rotor angle across multiple revolutions. A shaft seal keeps lubricants inside the housing while blocking contaminants, and the standard shaft-end geometry matches the 071 frame size for tight mounting spaces.
