MDD071A-N-060-N2T-095PB2
The MDD071A-N-060-N2T-095PB2 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers where precise velocity and position regulation are required in industrial automation. When paired with a compatible drive, it converts commanded electrical input into controlled rotary motion for packaging equipment, assembly stations, and material-handling axes that depend on repeatable starts, stops, and speed changes. The motor is suited for closed-loop motion tasks where accurate response to changing command values is important during normal machine operation.
At the mechanical interface, the centering pilot is 95 mm, and the rotor is factory balanced to a standard grade so the motor can seat accurately in a mating flange. Power and feedback conductors exit on Side B through a keyed connector, which helps keep cable routing orderly and prevents incorrect connector orientation. The motor delivers a continuous standstill torque of 2.2 Nm and can reach an operating speed of 6000 rpm for fast machine cycles. An integrated blocking brake provides 6.5 Nm of holding torque during power-off conditions, and a shaft seal helps protect internal components from splash exposure during routine operation.
Position data comes from the integrated multiturn absolute encoder, which reports shaft angle over multiple revolutions so the drive can maintain position awareness during extended travel. Feedback communication uses Digital servo feedback (DSF), which supports the digital control structure used by compatible drives and passes motor data without an analog stage. This arrangement helps the controller track motion continuously during indexing, interpolation, and stop-to-stop movement. The drive identifies the unit as motor size 071 with length code A, and the output shaft uses a keyway so torque can be transferred securely to a coupling, pulley, or similar driven element.
