MDD071A-N-060-N2T-095PL0
The MDD071A-N-060-N2T-095PL0 is a synchronous servo motor produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. The unit is intended for use with digital drive controllers where tight speed regulation and rapid acceleration are required in automated assembly lines, packaging stations, and machine-tool feeds. By combining a compact 071 frame with an integrated feedback system, the motor delivers repeatable torque and speed performance for multi-axis systems used in industrial automation during repetitive motion cycles.
The motor delivers a continuous standstill torque of 2.2 Nm, allowing stable holding force without overheating when the shaft is locked. Under rated excitation, the rotor can reach a nominal speed of 6000 rpm, which suits fast traverse requirements in light-to-medium load axes. Mechanical integration is supported by a 95 mm centering diameter that aligns the housing with standard mounting fixtures while helping limit vibration. Size code 071 and length code A indicate a short stator stack that lowers mass and inertia for responsive cycle changes. Position data are returned through digital servo feedback, and the built-in integrated multi-turn absolute encoder supplies absolute position information over multiple revolutions, so homing is not required after power is restored.
Power and feedback conductors are routed to the motor through a connector positioned on the left side of the frame, which helps organize cable runs in tight cabinets. A shaft seal is fitted to protect the internal bearings from coolant or dust ingress, and the shaft itself is machined with a keyway for slip-free coupling to pulleys or gears. The shaft end follows a standard single-ended pattern, and the housing uses a standard configuration. Because the motor is supplied without a blocking brake, any position holding during power-off must be achieved through the drive or an external mechanical lock.
