MDD071A-N-060-N2T-095PR0
The MDD071A-N-060-N2T-095PR0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts controlled electrical power into rotary motion that can be regulated precisely by a matching drive. In automated machinery, this unit provides repeatable speed and position control for axes such as pick-and-place heads, packaging spindles, or compact gantries where rapid acceleration and tight positional accuracy are required.
Mechanical output is supported by a continuous standstill torque of 2.2 Nm, giving the drive enough holding force for low-inertia loads without thermal overload. Under rated excitation, it reaches a nominal speed of 6000 rpm, allowing fast cycle times in short-stroke applications. Mounting into a machine frame is simplified by a centering diameter of 95 mm, and the motor has size 071 with length code A. Standard dynamic balancing limits residual vibration, helping protect connected bearings and couplings. A sealed shaft end, a housing in the series standard form, and a keyed output shaft complete the basic mechanical package while maintaining compatibility with common couplings and gearheads.
Electrical integration uses a keyway shaft and right-side power and feedback exits, with cabling routed by the Right connection orientation through a single circular connector. Position data comes from an Integrated multiturn absolute encoder, and the drive processes this feedback through Digital servo feedback (DSF) for closed-loop control. There is no blocking brake, so external holding devices must secure vertical loads when power is removed. A shaft seal is fitted to help limit oil or coolant ingress at the interface, and the shaft is present only on side A with no shaft end on side B. The housing keeps the standard finish, and the supplied connector allows power and signal routing without a custom junction box.
