Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
subseries image of MDD071B-N-040-N2S-095GB1

MDD071B-N-040-N2S-095GB1

by Bosch Rexroth Indramat
Request a quote
The MDD071B-N-040-N2S-095GB1 servo motor is a product of Bosch Rexroth Indramat. This AC servo motor flaunts a compact build and electronic commutation and is ideal for rapid-response automation systems due to its high overload capabilities. Its brushless design incorporates a permanent magnet and lifetime-lubricated bearings. The motor utilizes digital servo feedback to assess its relative indirect position, negating the necessity for additional incremental encoders and accelerating its start-up time. The output shaft is plain, guaranteeing a non-positive shaft-hub connection, and the motor features a seal that forms a barrier against liquid ingress alongside its shaft. The motor housing, rated IP 65 per DIN 40 050, is touch-proof, dustproof and immune to multidirectional water sprays. The MDD071B-N-040-N2S-095GB1 is further equipped with a 3.0Nm torque blocking brake to secure the servo axis. The motor's rotor, with a moment of inertia of 8.9 x 10-4 kgm2, yields low inertia and a favorable torque-inertia ratio.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Code: MDD071B-N-040-N2S-095GB1
  • Product Type: AC Servo Motor
  • Special Features: Electronic commutation, high overload capabilities, compact build
  • Commutation Type: Permanent magnet-excited
  • Bearings: Lifetime-lubricated
  • Feedback Type: Digital servo
  • Motor Parameters Storage: In encoder's data memory
  • Output Shaft Type: Plain, non-positive shaft-hub connection
  • Torque Transmission: Backlash-free
  • Sealing: Prevents liquid entry along the shaft
  • Housing Rating: IP 65 per DIN 40 050
  • Housing Coat Properties: Resistant to yellowing, chalky buildup, lyes
  • Blocking Brake Torque: 3.0Nm
  • Operational Principle: Closed-circuit
  • Activation: By digital drive controller
  • Nominal Speed: 4,000 revolutions per minute
  • Rotor Composition: Permanent magnets, rare-earth materials
  • Moment of Inertia: 8.9 x 10-4 kgm2
  • Thermal Protection: Thermal sensor in stator windings
  • Cooling Method: Natural convection and surface cooling.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204