Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
subseries image of MDD071B-N-040-N2T-095PB1

MDD071B-N-040-N2T-095PB1

by Bosch Rexroth Indramat
Request a quote
The MDD071B-N-040-N2T-095PB1 digital AC servomotor, produced by Bosch Rexroth Indramat, provides a high-speed cutting solution predominantly for roller feeds. The unit, which is crafted with low inertia, owing to the materials used in creating its permanent magnets, has a size code of 071 and boasts a brushless design. This device uses a temperature sensor within its windings for monitoring heat levels and its parts are protected from contact with any high-voltage components by its housing and covers. A RAL 9005 coated housing ensures the motor can function under weatherproofed conditions when stationary. The shaft-hub connection point of the motor experiences multi-axial stress and it has a continuous torque of 4.4Nm at standby, cooled by natural convection. Installation is done either horizontally or vertically as postulated by DIN IEC 34-7 specifications. While using the product, maintenance and clean-up should only be performed after disconnecting from the power supply.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Type: Digital AC Servomotor
  • MDD071B-N-040-N2T-095PB1 Purpose: Used for highspeed cutting, especially in roller feeds
  • Inertia: Low
  • Design: Brushless
  • Size Code: 071
  • Monitoring: Temperature sensor in windings
  • Connection: Manufacturers cables recommended
  • Installation Elevation: Maximum 1000m over sea level
  • Protection: Covers and housing against high voltage contact
  • Housing Coat: RAL 9005
  • Operating Conditions: Weatherproofed stationary function per Class 3M1 and EN 60721-3-3 specifications
  • Mounting: Shock-damped, depends on installation machine, options for horizontal and vertical as per DIN IEC 34-7 specifications
  • Shaft End: Standard Side B
  • Torque: Continuous 4.4Nm at standstill with natural convection cooling
  • Shaft-Hub Connection: Multi-axial stress state, radial and axial forces must not exceed maximum limit
  • Cleaning/Maintenance: Motor should be disconnected from power supply
  • Reseating Process Speed: Approximately 100rpm
  • Power Connector Output Direction: B side
  • Error Control: Drive controller triggers error message during thermal shutdown.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204