MDD071B-N-060-N2S-095GR1
The MDD071B-N-060-N2S-095GR1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it translates regulated currents into rotational motion that positions tooling, conveyor stations, or handling modules in industrial automation cells. The unit fits compact machinery because its frame and standard housing minimize footprint, while the integrated brake supports holding on vertical axes. Direct mounting is aided by the centering register, and the side-mounted power and feedback connection helps keep cabling outside moving zones.
At standstill, the motor supplies a continuous torque of 4.4 Nm, allowing static load support during positioning or dwell phases under rated current. When speed commands reach the rated value of 6000 rpm, the magnetic circuit and rotor geometry support smooth rotation for rapid indexing cycles. A centering diameter of 95 mm aligns the motor precisely on the machine frame and helps keep runout low. The integrated blocking brake provides 3.0 Nm of holding torque so suspended loads stay fixed when power is removed. Position data are returned through digital servo feedback, enabling the controller to close the loop at high bandwidth, and a plug-in connector simplifies installation.
The motor also supports reliable operation in harsh shop environments. Frame code 071 identifies the motor size used for this housing. There is a shaft seal at the output end, which helps limit oil and dust ingress along the plain shaft and helps protect the internal bearings. Standard dynamic balancing keeps vibration acceptable across the full speed range, and the right-side cable exit reduces strain on flexible conduits in tight enclosures. Motor length code B preserves torque density without adding unnecessary bulk to compact multi-axis assemblies.
