Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
subseries image of MDD071C-N-040-N2T-095GA1

MDD071C-N-040-N2T-095GA1

by Bosch Rexroth Indramat
Request a quote
The MDD071C-N-040-N2T-095GA1 is a digital AC servomotor produced by Bosch Rexroth Indramat. Primarily used in the tooling industry, its combination with a digital drive controller makes for an efficient automation system. Known for its high contouring accuracy and operational functionality, the motor also offers a variety of continuous torques when operating in standstill mode. In terms of safety, it features a blocking brake to bring the motor to a standstill when powered down. With dedicated flanged sockets for power and feedback cables, the motor can operate in temperatures between 0°C and 45°C. Its IP65 protection rating ensures power, feedback, and blower connections are safeguarded. To prevent position shifts when fitted with bevel gear pinions, the motor is controlled and monitored by a drive controller. However, if stored for over two years, reseating will be necessary. Storage and shipping must be done horizontally due to its design.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Type: Digital AC servomotor
  • Model: MDD071C-N-040-N2T-095GA1
  • Application: Used with a digital drive controller
  • Industry Use: Tooling industries
  • Product Group: MDD
  • Features: High contouring accuracy, High operational functionality, Electronic commutation functionality, Various continuous torques in standstill mode with natural convection and surface cooling modes, Equipped with a blocking brake
  • Functionality: Brings axis to a standstill when powered off
  • Connections: Dedicated flanged sockets for power and feedback cables
  • Ambient Operating Temperature: 0°C to 45°C
  • Storage Orientation: Horizontal
  • Protection: Housing, covers and IP 65 protection rating for power, feedback and blower connections
  • Mounting: Vertical, shaft facing either upward or downward
  • Customization: Cannot support a customized pilot diameter
  • Additional Component: Shaft sealing fitted onto output shaft
  • Warning: May exhibit a position shift when drive pinions are fitted with bevel gear pinions
  • Control: Controlled and monitored by related drive controller
  • Maintenance: Requires reseating if storage period exceeds two years
  • Shipping: Shipped globally

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204