Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com

MDD093C-N-060-N2M-130GA1

Request a quote
Bosch Rexroth Indramat, a leading global manufacturer of AC servo motors, offers the MDD093C-N-060-N2M-130GA1 model with the promise of longevity due to its brushless architecture and oiled bearings. With a peak current of 293.3 A, an inertia of 42 x 10-4 kgm2, and theoretical maximum torque of 60.6 Nm, this motor performs at optimum levels typically between 0 to +45 degrees Celsius. It's equipped with a 0.5 kg holding brake with nominal current and voltage of 0.5 A and 24 volts respectively, and clamping and release delays of 20 and 60 milliseconds. Enhanced with protection against intrusion (IP65 standard), insulation class of F, and balancing class of N, mitigating rust or corrosion is effortless. Transporting requires maintaining between -20 and +80 degrees Celsius, while installation between 0 and 1000 meters above sea level. Operating at 6000 RPM, it generates 19.5 Nm of continuous torque and 65.2 A of continuous current, with winding resistance of 0.07 ohms and inductance of 0.7 mH. This model carries additional features such as electrical commutation, permanent magnetic properties, an integrated multiturn absolute encoder, and a plain output shaft.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Model: MDD093C-N-060-N2M-130GA1
  • Peak Current: 293.3 A
  • Theoretical Maximum Torque: 60.6 Nm
  • Inertia: 42 x 10-4 kgm2
  • Transportation Temperature Range: -20 to +80 degrees Celsius
  • Architecture: Brushless
  • Bearings: Oiled
  • Protection Standard: IP65
  • Insulation Class: F
  • Balancing Class: N
  • Centering Diameter: 130 mm
  • Operation Temperature Range: 0 to +45 degrees Celsius
  • Holding Brake Weight: 0.5 kilogram
  • Holding Brake Clamping Delay: 20 milliseconds
  • Holding Brake Release Delay: 60 milliseconds
  • Holding Brake Nominal Current: 0.5 A
  • Holding Brake Nominal Voltage: 24 volts
  • Weight: 22 kilos
  • Torque Constant: 0.30 Nm/A
  • Commutation: Electrical
  • Permanent Magnetic Qualities: Yes
  • Maximum Motor Speed: 6000 RPM
  • Continuous Torque: 19.5 Nm
  • Continuous Current at Rest: 65.2 A
  • Winding Resistance: 0.07 ohms
  • Winding Inductance: 0.7 mH
  • Placement Altitude Range: 0 to 1000 meters above sea level
  • Encoder: Integrated multiturn absolute
  • Output Shaft: Plain

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204