Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of MDD112C-N-030-N2M-130PA1

MDD112C-N-030-N2M-130PA1

by Bosch Rexroth Indramat
$4,495.62 - $4,495.62
$4,495.62
$4,495.62 - $4,495.62
$4,495.62
Available, Shipping Varies
The MDD112C-N-030-N2M-130PA1 is a digital AC servomotor produced by Bosch Rexroth Indramat, offering exceptional operational reliability and maintenance-free performance. Ideal for high-speed cutting tasks, this servomotor - which employs both surface cooling and natural convection - features low inertia, a 14Nm blocking brake, and an encoder system for feedback. It also includes a shaft with a keyway and connectors on flanged sockets for direct connection of power and feedback cables. The motor's housing adopts a black prime coating and conforms to Design B14, allowing vertical positioning of the shaft. The optimal operating temperature should stay below 55°C, while the shock duration for the longitudinal axis is capped at 22ms. IP 65 protection safeguards the shaft, with a standard pilot diameter of 130mm. Note, however, the blocking brake does not ensure personal safety. Finally, the motor's application should remain within its thermal limits, as per its torque-speed parameters.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Code: MDD112C-N-030-N2M-130PA1
  • Size Code: 112
  • Function: Works with a digital drive controller
  • Ideal Use: Cutting in high-speed ranges
  • Inertia: Low
  • Design: Permanent magnets using iron oxide or rare earth magnetic materials
  • Feedback: Encoder system
  • Feature: 14Nm blocking brake
  • Operation: High operational reliability and maintenance-free
  • Housing: Standard, supports surface cooling and natural convection
  • Shaft: Includes a keyway for form-fitting shaft-hub-connections
  • Connection: Connectors on flanged sockets for direct connection of feedback and power cables
  • Maximum Operating Temperature: 55°C
  • Shock Duration: Maximum 22ms for longitudinal axis
  • Housing Coating: Black prime
  • Mounting: Design B14, vertical installation with shaft up or down
  • Pilot Diameter: Standard 130mm
  • Protection Category: IP 65 for shaft
  • Cooling: Radial-type surface cooling
  • Brake: Blocking brake without personnel safety assurance
  • Reseating Process: Requires drive controller shutdown for a minute after closing brake
  • Connectors: Straight or angle type for feedback
  • Cables: Connecting cables for brake, temperature sensor, and power connection
  • Torque-Speed Characteristics: Utilized to check thermal limits application

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204