Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of MDD112D-N-030-N2M-130GA0

MDD112D-N-030-N2M-130GA0

by Bosch Rexroth Indramat
$2,892.98 - $2,892.98
$2,892.98
$2,892.98 - $2,892.98
$2,892.98
Available, Shipping Varies
The Bosch Rexroth Indramat MDD112D-N-030-N2M-130GA0 is a weather-resistant AC synchronous motor, built to operate under stringent conditions as per EN 60721-3-3 or IEC 721-3-3 specifications. When paired with a digital drive controller from the same manufacturer, it provides a fast and cost-efficient solution. The motor features strong permanent magnets, superior heat conduction, and high overload capacity. The shaft is built to manage high radial loads and allows direct attachment of belt pulleys and pinions. Equipped with a thermally efficient design and a rotor moment of inertia of 230 x 10-4 kgm2, the motor can operate up to an altitude of 1,000m. The unit boasts a protection category of IP 65 and doesn't come with a holding brake. The housing can resist diluted acids and lyes. The device must be carefully mounted to avoid liquid collection at the output shaft.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Code: MDD112D-N-030-N2M-130GA0
  • Product Type: AC synchronous motor
  • Operating Conditions: Stationary/weather-proofed
  • Specifications Compliance: EN 60721-3-3 or IEC 721-3-3
  • Overload Capability: High
  • Shaft Type: Capable of high radial loads
  • Attachment Capability: Supports direct attachment of belt pulleys and pinions
  • Flange Design: Features through-holes for IM B5 or IM B14 design
  • Balance Class: N, DIN VDE 0530, section 14
  • Shaft Connector: Plain shaft with connector to side A
  • Thermal Time Constant: 120 minutes
  • Installation Height: Less than 1,000m above sea level
  • Rotor Moment of Inertia: 230 x 10-4 kgm2
  • Protection Category: IP 65
  • Holding Brake: None
  • Housing Coating: Resistant to lyes and diluted acids
  • Mounting Orientations: Supports IM V3 and IM V19, but must prevent liquid collection at output shaft.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204