Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of MDD115A-N-015-N2L-130PB0

MDD115A-N-015-N2L-130PB0

by Bosch Rexroth Indramat
$2,667.74 - $2,667.74
$2,667.74
$2,667.74 - $2,667.74
$2,667.74
Available, Shipping Varies
The MDD115A-N-015-N2L-130PB0 is a Bosch Rexroth Indramat digital AC servomotor, primarily designed for high-speed cutting and used in roller feeds. The device is distinct with its digital servo feedback and ability to provide maintenance-free operation, alongside exhibiting high dynamics. The servomotor is equipped with permanent magnets within its rotor and an output shaft featuring a keyway, but no blocking brake. This robust unit guarantees protection against water invasion, complying with DIN 40 050 guidelines for its housing and covers. It can function at maximum temperatures of 55°C and offers an IP 65 degree protection for its output shaft. Built with a shock-dampened mounting solution, the motor can be installed upright with the shaft facing upwards or downwards. Finally, the motor should only be operated by trained personnel and has a rated maximum current of 93.9A.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • MDD115A-N-015-N2L-130PB0 Usage: Cannot be used without a drive controller
  • MDD115A-N-015-N2L-130PB0 Function: Cutting at high-speed ranges
  • Feedback System: Digital Servo Feedback
  • Application: used in roller feeds
  • Product Design: Rotor with Permanent Magnets
  • Product Performance: High Dynamics
  • Maintenance: Maintenance-Free Operation
  • Physical Structure: Output shaft with Keyway and no Blocking brake
  • Operating Conditions: Decreased output data if the ambient operating conditions exceeded
  • Water protection: Protected against penetration of water
  • Standards: Constructed according to DIN 40 050 guidelines
  • Temperature Range: Maximum 55°C
  • Protection Level: IP 65 degree for output shaft
  • Mounting Solution: Shock-damped
  • Installation: Can be installed with shaft facing upward or downward
  • Mounting Flange Diameter: 130mm
  • Radial Force: Depends on the average speed and point of application
  • Temperature Sensor: Installed in windings
  • Angle Feedback Connector: B-side oriented
  • Shipping: Dispatch to any destination
  • Maximum Current Rating: 93.9A.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204