Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com

MDD115C-N-010-N2L-130GA0/S031

Request a quote
The MDD115C-N-010-N2L-130GA0/S031 is an advanced digital AC servomotor produced by Bosch Rexroth Indramat. Equipped with an integrated temperature sensor in the windings, the motor protects itself from overheating, constantly monitoring its internal thermal status. It contains a power cable for the motor connection, a connecting cable for the holding brake, and an additional one for the temperature sensor. An optical encoder system is incorporated for precise feedback. The energy-efficient motor can operate intermittently for a maximum cycle time of 15 minutes and is encased in a compact, standard housing that facilitates both surface cooling and natural convection. The brushless design ensures a maintenance-free operation, while its construction allows direct attachment of belt pulleys and pinions to its shaft. It can operate at altitudes up to 1000m and is resistant to water penetration. Its housing is paintable, and it supports multiple cooling methods.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • MDD115C-N-010-N2L-130GA0/S031 Specifications: Digital AC servomotor with integrated temperature sensor
  • Motor Power Connection Cable: Includes power cable, connecting cable for holding brake, and connecting cable for temperature sensor
  • Feedback System: Optical encoder
  • Duty Cycle Time: Maximum of 15 minutes with intermittent operations
  • Device Length: 458mm
  • Output Shaft: Cylindrical end as per DIN 748, Section 3 specifications
  • Housing Type: Standard housing supporting surface cooling and natural convection
  • Operating Condition: Suitable for highly dynamic applications
  • Maintenance Level: Maintenance-free due to brushless design
  • Design: Compact construction with power to weight ratio
  • Permanent Magnets Material: Iron oxide or rare earth magnetic materials
  • Shaft Attachments: Allows direct attachment of belt pulleys and pinions
  • Floating Bearing Position: On the A side to absorb radial forces during operation
  • Installation Elevation: Up to 1000m over sea level
  • Water Resistance: Yes, protected against water penetration
  • Creatable Coting: Additional paint layer over prime coat on housing (up to 40µm)
  • Paint Resistance: Resistant to diluted acids and lyes
  • Installation Orientation: Any, with precautions for vertical installation preventing fluid accumulation at output shaft
  • Cooling Methods: Axial surface cooling and radial surface cooling via blower.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204