Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com

MDD115D-N-020-N2L-130GA0

Request a quote
The Bosch Rexroth Indramat MDD115D-N-020-N2L-130GA0 is a digital AC servomotor with high power density that works in conjunction with a digital drive controller from the same manufacturer. The motor boasts low inertia due to the material composition of the permanent magnets. It features a non-positive type shaft-hub connection, boasts protection against water penetration, and has standardized electrical connections. The shaft, located on the B-side, must not be subjected to fluid accumulation. Consideration of utilization factors is essential when operating beyond ideal limits. Thermal stress might occur when drive pinions with helical teeth are used. It can endure poor environmental conditions and offers a quick response automatization system. Its feedback cable resists adhesion, and the laminated core houses permanent magnets. Power connections utilize cables with a minimum 8AWG cross-section. The device should be protected against tipping and loading during storage and transportation.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Model: MDD115D-N-020-N2L-130GA0
  • Type: Digital AC servomotor
  • Power Density: High
  • Material: Permanent Magnets
  • Shaft Type: Plain, Non-Positive Type Shaft-Hub Connections
  • Water Protection: Yes
  • Placement: Can be installed with shaft towards top, should not have fluid accumulation
  • Thermal Stress: Occurs when drive pinions with helical teeth are used
  • Reseating Action: Required if operation after a couple of years
  • Shaft Position: Fitted on B side
  • Electrical Connections: Standardized
  • Encoder: Has an encoder with relative position detection
  • Standstill Mode Continuous Current: 77A (if cooled by natural convection)
  • Power Connection Cable: Minimum 8AWG cross-section
  • Product Stability: Protection against tipping and loading during storage and transport
  • Feedback Cable: Poor adhesion property, prevents from sticking in drag chains
  • Shaft Care: Must be free of impact to avoid bearing damage
  • Response Time: Rapid with drive controller
  • Core: Houses a laminated core embedded with permanent magnets
  • Environmental Conditions Usage: Can be used under poor conditions

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204