Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of MHD093B-058-NG0-AN

MHD093B-058-NG0-AN

by Bosch Rexroth Indramat
$20,332.20 - $20,332.20
$20,332.20
$20,332.20 - $20,332.20
$20,332.20
In Stock, Ships Today
The MHD093B-058-NG0-AN motor is a high-quality product from Bosch Rexroth Indramat, known for its high dynamics resulting from an optimal torque-to-inertia mass ratio. Bearing longevity is crucial, hence bearing replacement is advised when running noise is observed or upon reaching the nominal service life. Regular inspection of connection lines for damage is also recommended. Featuring a torque constant of 1.5Nm/A at 20°C and a voltage constant of 136V/1,000min-1 at 20°C, the motor is designed to withstand high overloads due to effective heat dissipation from the stator windings to the housing exterior. The motor has a flange that meets DIN 42948 specifications, allowing for the easy attachment of devices, belt pulleys, and pinions. Modifications to its original structure are prohibited. Only trained personnel should operate it to ensure safety. Finally, the motor should not be used without a secure ground wire connection and must be kept clean and away from extreme temperatures and conditions.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • MHD093B-058-NG0-AN Synchronous Motor Specifications: Ensure freedom from excessive shavings, dust, or dirt and regular cleaning of cooling ribs
  • Effect of Axial and Radial Loads: May adversely affect the service life of bearings and cause running noise
  • Torque Constant: 1.5Nm/A at 20°C
  • Features: High dynamics due to favorable torque-to-inertia mass ratio, DIN 42948 compliant flange for easy device attachment, Voltage constant of 136V/1,000min-1 at 20°C, Favorable heat dissipation to exterior wall of housing, Minimal structural modifications
  • Operating guidelines: Strictly for trained personnel, not suitable for underwater use and areas with high temperature variations
  • Winding Resistance: 1.26 Ohms at 20°C
  • Motor Cable: Minimum strand cross-section of 1.5mm2
  • Ground Wire Connection: Permanent connection required.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204