Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com

MSK050C-0300-NN-M1-UP1-NSNN

Request a quote
The MSK050C-0300-NN-M1-UP1-NSNN is a synchronous servo motor designed by Bosch Rexroth Indramat. This product is to be handled with cranes utilizing loop lifting straps and must be installed under specific safety precautions, including protection against system restart and de-energized, dry connections. It features a burr-free mountable flange and the terminal box should only be opened for connection purposes. At a sound pressure level of less than 75dBA and a thermal time constant of 14 minutes, this motor is designed for non-malfunctioning conditions and cannot be directly operated on single-phase or three-phase networks. Extra actuators and sensors may be necessary to ensure its function. It is shipped worldwide but should not be used underwater or in conditions outside its environmental specifications. The device also includes an electrically releasing holding brake and flushable screwed connections.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Code: MSK050C-0300-NN-M1-UP1-NSNN
  • Transport Requirement: Cranes with loop lifting straps
  • Installation Requirement: Adjacent live parts shielding, System restart protection
  • Pre-Mounting Check: Flange free of burrs
  • Electrical Connection Requirement: After mechanical assembly
  • Connector Condition: To be connected and disconnected when de-energized and dry
  • Terminal Box Usage: Only for connection and immediately closed afterwards
  • Power Connector Type: Circular
  • Winding Code: 0300
  • Sound Pressure Level: Less than 75dBA
  • Thermal Time Constant: 14 minutes
  • Operation Condition: Not to be operated in malfunctioning or damaged state
  • Power Compatibility: Not suitable for direct mains operation on a single-phase network or a three-phase network
  • Additional Instrument Requirement: Might require additional actuators and sensors
  • Fault Condition: Can cause the connected drive controller to move dangerously
  • Delivery: Available worldwide
  • Housing Feature: Flushing connection with a blind plug
  • Holding Brake Operation: Electrically releasing principle
  • Environmental Condition For Operation: Specified environmental conditions only
  • Restrictions: Not recommended for underwater use
  • Flush Capability: Can be flushed through its screwed connections.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204