Skip to content
Call:1-888-551-3082 International: 1-919-443-0207
Call:1-888-551-3082 International: 1-919-443-0207


Original price $10,956.00 - Original price $10,956.00
Original price
$10,956.00 - $10,956.00
Current price $10,956.00
Available, Shipping Varies
The MSK061C-0200-NN-M2-UG0-RNNN, is a reliable servomotor manufactured by Bosch Rexroth Indramat with a C length code and no holding brake. This high-quality motor boasts increased runout and concentricity that align with DIN 42955 standards but isn't suited for underwater operation. Users should be aware that only trained and qualified personnel should operate and interact with the motor and it should only be used with approved accessories to avoid dangerous, uncontrolled movements. Before being turned on, the device must have a fixed grounding connection. It should only be touched once it has been off for 140 minutes to allow for complete cooling. The device may explode under heavy tensile load but this can be controlled by ensuring the grounding connector in its motor cable is properly connected and free from corrosion. The motor is designed to operate at a maximum temperature of 155°C in the highest ambient temperature, has a sound pressure level of less than 75 dBA, and can be installed in any position.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product ID: MSK061C-0200-NN-M2-UG0-RNNN
  • Product Type: Synchronous Servomotor
  • Length Code: C
  • Holding Brake: Not present
  • Runout and Concentricity: According to DIN 42955
  • Underwater Operation: Unsupported
  • Accessories Recommendation: Manufacturer Approved Only
  • Operational configuration: Specific
  • Required Operator: Trained and Qualified Personnel
  • Possible Faults: Dangerous movements in associated drive controller
  • Required Cool Down Time: 140 Minutes
  • Sound Pressure Level: Less than 75dBA
  • Connection Cable Tensile Load: Explosion risk with high tensile
  • Grounding Connection Requirement: Yes Permanent
  • Temperature of Components: Maximum 155°C
  • Protection Class Requirement: High
  • Shaft Type: Plain and Smooth with DS thread
  • Shaft Compliance: DIN 332, Part 2
  • Protection Class: IP 65 for output shaft and housing
  • Installation Flexibility: Can be installed in any position
  • Shipping Availability: Global

Get In Contact


Phone Number: 1-888-551-3082

International: 1-919-443-0207

Fax: 1-919-867-6204