Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of MSK070D-0150-NN-M2-UG0-RNNN

MSK070D-0150-NN-M2-UG0-RNNN

by Bosch Rexroth Indramat
Request a quote
The Bosch Rexroth MSK070D-0150-NN-M2-UG0-RNNN is a synchronous motor offering superior runout and concentricity as per DIN 42955 standards. The motor requires a connection to an appropriate machine while observing tightening torque requirements. It's advised to use this product with the manufacturer's connection cables and it should not operate without a drive controller. Proper mechanical assembly should be confirmed before establishing an electrical connection. The motor boasts a smooth shaft with a standard sealing ring and it can operate maintenance-free if used under recommended conditions. The bearing life may be shortened with excessively high temperature operation, and dust or dirt can hinder its performance. Cooling is advisable prior to maintenance procedures. The motor consists of parts made from steel, brass, aluminum, copper and magnetic materials, and should be used in its original, unmodified state. Certain applications may require additional sensors and actuators for control and monitoring purposes.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Code: MSK070D-0150-NN-M2-UG0-RNNN
  • Product Type: Synchronous Motor
  • Runout and Concentricity: As per DIN 42955 specifications
  • Mandatory Connection: To associated machine
  • Preferred Component Use: With readymade connection cables from the same manufacturer
  • Flange Socket Usage: Not to be turned with tools
  • Drive Controller Requirement: Mandatory
  • Connection Sequence: Mechanical assembly before electrical connection
  • Commissioning Prerequisite: No damage to the motor
  • Shutdown Procedure: Bring related drive to a controlled standstill using machine-side control commands
  • Maintenance Requirement: None within specified operating conditions
  • Shaft: Plain, smooth with standard shaft sealing ring
  • Bearing Life: Decreased at high temperatures
  • Sensitivity: To excessive dust, chips or dirt
  • Transportation: Via reputed freight carriers
  • Cooling Time: Before maintenance
  • Vibration Cause: Insufficiently adjusted shaft end attachments or loose mounting screws
  • Safety Measures: Secured against fall before disconnecting mechanical connections
  • Material Composition: Steel, brass, aluminum, copper and magnetic materials
  • Modification Rules: Must be used in original state
  • Additional Requirements: May need extra sensors and actuators for control and monitoring

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204